Document Actions
adhoco.H1
central unit
Ausschreibungstext: 
Product description:
When manually operating the terminal equipment with buttons, switches or the adhoco.R1 remote control, the control unit adhoco.H1 recognizes these commands as user preferences and automatically adapts its switching program. The adhoco.H1 control unit is thus able to set the ideal operating conditions for the terminal equipment via the radio network. The operation of a conventional switch thus becomes an exception.
Up to 16 rooms can be equipped with any number of Adhoco components and controlled by a single adhoco.H1 control unit. In addition to Adhoco components, it is also possible to integrate other products, which correspond to the Zigbee standard, into the Adhoco system.
The adhoco.H1 control unit can be wall-mounted or placed on a transparent support (optional).
A high-quality colour display informs the user about the operation mode, alarms and transmission quality. It also displays the time, room temperature and the course of the measured values.
The mains cable feeds the adhoco.H1 control unit with energy (Power over Ethernet). With the same cable the control unit can be connected to the Internet, enabling remote access and the transmission of messages as SMS, e-mail or fax.
Operation
The adhoco.H1 control unit is operated with its three buttons and its large colour display. Just like a mobile phone, the user may navigate through the menus, verify settings and configure the Adhoco system. If the adhoco.H1 control unit is connected to the Internet, remote control and remote polling are possible.
Functions
Automation
Product description:
 |
Application The central control unit adhoco.H1 provides for an optimum control of illumination, shading, heating, ventilation, air conditioning and other home automation components. It is ideally suited for the use in flats, detached family houses and office buildings. It optimises the comfort, decreases energy consumption and increases safety. |
Up to 16 rooms can be equipped with any number of Adhoco components and controlled by a single adhoco.H1 control unit. In addition to Adhoco components, it is also possible to integrate other products, which correspond to the Zigbee standard, into the Adhoco system.
The adhoco.H1 control unit can be wall-mounted or placed on a transparent support (optional).
A high-quality colour display informs the user about the operation mode, alarms and transmission quality. It also displays the time, room temperature and the course of the measured values.
The mains cable feeds the adhoco.H1 control unit with energy (Power over Ethernet). With the same cable the control unit can be connected to the Internet, enabling remote access and the transmission of messages as SMS, e-mail or fax.
Operation
The adhoco.H1 control unit is operated with its three buttons and its large colour display. Just like a mobile phone, the user may navigate through the menus, verify settings and configure the Adhoco system. If the adhoco.H1 control unit is connected to the Internet, remote control and remote polling are possible.
Functions
Automation
- Illumination (on/off, dimming, central functions, scenarios)
- Shading (roller blinds, venetian blinds, awnings)
- Heating (radiators / floor heating with room thermostats)
- Ventilation / motor-operated windows
- Energy-efficient operation thanks to forecasting the users' requirements and the characteristics of the building
- Heating monitoring
- Optimization of the lighting conditions (harmonization between artificial light and shading)
- Presence-optimized ventilation
- Presence simulation
- Motion detector with intrusion detection function in case of absence
- Monitoring of critical current-consuming appliances
- Recognition of unusual behaviour patterns (i.e. in case of an accident)
- Remote control (in the house)
- Remote access via the protected Internet connection
- Sending system messages and alarm messages via SMS, e-mail or fax.
- Graphic representation of the course of measured values
- Energy-savings display